Autocrin Rust Solvent
Composition: acid etch aqueous solution with inhibitory additives.
ТУ РБ 100172462.002-2002
Назначение продукта
- Removal of rust and inhibiting corrosion process on metal surface, creating mechanically strong passivating zinc phosphate film over it.
- Prolongation of service life of lacquer coatings when painting rusted metal products.
Рекомендации по применению
Stir the composition before use.
Remove layer of loose or sheet rust from the surface, degrease the surface. In places where rust shows through the lacquer coating first remove the layer of paint with a brush or special paint remover, then treat with the rust solvent.
Apply the rust solvent with a sponge, brush, spread on the surface by spraying or dipping.
Repeat treatment 1 or 2 more times if necessary.
When the surface is thoroughly dry, prime it and paint over it.
Safety precautions:
Corrosive substance! Keep away from children!
Avoid contact with mucous membranes! In case of skin or eye contact rinse immediately with large amount of water and contact a physician. Handle in the open air or in a well-ventilated room wearing special protective clothing and using individual protective equipment.
Расход
|
0,08 |
Технические характеристики
| Parameter | TC RB 100172462.002-2002 requirements |
| Appearance | transparent blue liquid (insignificant amount of residue is allowed) |
| Density at 20±2°С, g/cm3, not less than | 1,100±0,050 |
| pH of the medium , not exceeding | 3,0 |
| Guarantee period, months | 12 |
Упаковка продукции
Plastic containers with capacity of:
......0,5 l ......20 l
Область применения
