Autofix-PS Bitumen Polymer Adhesive Mastic
ТУ BY 100172462.566-2008
Product Application
- Adhesion of foam polystyrene-based thermal insulation materials to concrete, brick, plastered, metallic surfaces.
Recommendations for Usage
Stir thoroughly before use!
Work surface must be dry (moisture content in isolated surface must not exceed 5 mass %), cleaned from dust, oil, icing and other contaminations.
Surface must be prepared by priming with the Autocrin primer.
Apply on prepared surface with a painting tool, by means of air or airless spraying, or by pouring and leveling with special rakes.
Keep for 30-40 minutes, join adherent surfaces and press tightly throughout the whole application area.
When applying in low-temperatures the mastic must be held at room-temperature conditions for at least 10 hours before application.
Store in closed containers.
Safety precautions:
Flammable liquid!
Handle in the open air or in a well-ventilated room wearing special protective clothing and using individual protective equipment. Do not use spark-forming instruments.
Расход
|
1,6÷2,0 kg/m2 Recommended to apply in two steps by 0.8÷1.0 kg/m2, for the purpose of drying time reduction. Increasing expenditure of the mastic does not lead to improvement of the quality of work! |
Technical Parameters
| Parameter | TC RB 100172462.566-2008 requirements | Actual value |
| Color | black | black |
| Mass fraction of nonvolatile substances, % | 30 | 60 |
| Strength of adhesion to the base, MPa, not less than - to metal - to concrete |
0,45 0,50 |
0,8 0,6 |
| Strength of adhesion to foam polystyrene, MPa, not less than | 0,3 | 0,4 |
| Relative elongation at rupture, %, not less than | 200 | >500 |
| Nominal tension strength, MPa, not less than | 0,1 | 0,1 |
| Thermal resistance, °С | 80 | 80 |
| Flexibility of film on a bar with 5 mm radius at temperatures not exceeding minus 5°С | Absence of cracks | Absence of cracks |
| Water absorption in the course of 24 h, mass %, not more than | 1,0 | 0,1 |
| Water proofing capacity at 0.001 MPa pressure in the course of 24 hours | no water drops present | no water drops present |
| Time of drying to the 2nd degree condition, hours, not more than | 24 | 24 |
| Working temperature range,°С | -10 ÷ +30 | |
| Guarantee period, months | 6 | |
| Setting time, hours, not more than | 24 | |
| Complete adhesion time, days, not more than | 7 | |
Solvents: Nefras (white-spirit), solvent
Fire hazard parameters:
- Flammability index according to GOST 30244 – G2;
- Fire propagation index according to GOST 30444 – RP1;
- Ignitability index according to GOST 30402 – B2.
Product Packaging
Metallic chromed lithographed euro-pails with capacity of:
......8,5 kg ......17 kg
Painted iron sheet containers with capacity of:
......40 kg ......50 kg
Область применения
